Sketch of the working area:
In order to make the robot mow within the desired area – and only that area – you need to mark the area by means of boundary wiring.
Before you start, it is important to make a sketch of the robot’s working area and the “obstacles” it should walk around, which, therefore, should also be marked with boundary wire. The boundary wire should be laid so that there will never be more than maximum 15 meters from the robot mower to the boundary wire.
In case your neighbour also has a robot mower it is important that you install your boundary wire and docking station minimum 2 meters from your neighbour’s boundary wire. In case the distance between your and your neighbour’s boundary wire is less than 2 meters, please contact your Redback service centre for further advice.
To avoid future problems, you should follow your sketch carefully to lay the boundary wire correctly.
